1) Draw a more finalized version with labeled dimensions from all perspectives (
1) Draw a more finalized version with labeled dimensions from all perspectives (front, back, left, right, top, bottom). Largest dimension should not exceed 8″ and smallest dimension should not be less than 3″. Keep in mind material being used will be 0.125″ thick (1/8″). Upload sketch below.
2) Create that sketch in Rhino, and assemble in Rhino as a 3D object (as in the video demo). All pieces should remain separate (it should not, for example, be boolean unioned together) but should be in their correct, assembled positions. It does not need to have a texture as in the video. Upload a google drive link to the 3DM file below.
THEN
Continue the designs you started. All pieces should remain separate (it should not, for example, be boolean unioned together) but should be in their correct, assembled positions when finished. NOTE: it is easier to keep a copy of the un-bent curves to use for laser cutting than to flatten the bent extrusions when we prep files for cutting next week. You can hide these on an inactive layer until we need them next week.
Upload a google drive link to the 3DM file below.
Keep in mind the project requirements: must be able to be built from 1/8″ think material, and must have a living hinge and/or inlay
