Category: Construction

DET 430 DRAFTING & DESIGN ENGINEERING TECHNOLOGY WORKSHOP Live and Dead Loads Complete a 600 words summary on the distinction between live and dead loads.

JIT in Construction

May 17, 2026

A contractor decides to receive materials in small, regular deliveries instead of one large shipment. What is the main advantage of this approach under JIT?

Just in Time In Construction

May 17, 2026

A construction site has very limited space and materials are often damaged when stored on site. Which JIT practice would best reduce this problem?

Shear & Bending Moment Diagram

May 16, 2026

Shear & Bending Moment Diagram Review the following exercise, then construct your own example with new dimensions and loading patterns. Shear Force and Bending-Moment Diagram For Uniform Distributed Load:

uncategorised

Lab 8A-Simply Supported Beam (either using SAP2000 or Manual…

May 11, 2026

Lab 8A-Simply Supported Beam (either using SAP2000 or Manually) Lab 8A-Simply Supported Beam (either using SAP2000 or Manually) Option 1: Use SAP2000 to complete “Problem-1″ of the attached document and submit your work here on Canvas. Option 2: Manually complete “Problem-1″ of the attached document and submit your work here on Canvas.

uncategorised

MODULE 8 ACTIVITY #16 SHORT INTERVAL SCHEDULE

May 9, 2026

MODULE 8 ACTIVITY #16 SHORT INTERVAL SCHEDULE Due: Sat May 9, 2026 11:59pmDue: Sat May 9, 2026 11:59pm Ungraded, 10 Possible Points10 Points Possible Attempt In Progress NEXT UP: Submit Assignment Unlimited Attempts Allowed This activity is designed to teach you how to create a short interval schedule in Microsoft Excel. Please download the Activity […]

uncategorised

MODULE 8 ACTIVITY #15 LINEAR SCHEDULING

May 8, 2026

MODULE 8 ACTIVITY #15 LINEAR SCHEDULING Due: Sat May 9, 2026 11:59pmDue: Sat May 9, 2026 11:59pm Ungraded, 10 Possible Points10 Points Possible Attempt In Progress NEXT UP: Submit Assignment Unlimited Attempts Allowed This activity is designed to teach you how to create a linear schedule using Microsoft Excel. Please download the Activity #15 Starter […]

uncategorised

Construction Question

May 5, 2026

Avoid use of long explanations. 1 sentences for each. Don’t leave any blank Student’s Name – Evans Kiprop Assesor is faisal javed Location is Perth Australia

uncategorised

CPCCCA3002 Carry out setting Simulation Task 2 Observation

May 4, 2026

Avoid use of long explanations. 1 sentences for each. Don’t leave any blank Student’s Name – Evans Kiprop Assesor is faisal javed Location is Perth Australia

uncategorised

MODULE 7 FINAL PROJECT SMALL PROJECT SCHEDULE

May 2, 2026

Unlimited Attempts Allowed This final project has been designed to examine your understanding for project scheduling and controls. Background: A small project with multiple activities has been created that need your help organizing the schedule. The Excel sheet linked above has all the project information that was gathered from your manager. Follow the steps listed […]